outboard motor repair - parts and motor repair manuals, outboard motor parts, marine engine parts and repair information for Yamaha, Mercury, Mariner, Mercruiser, Sportjet, Force, Mark, US Marine, and Chrysler motors.

PARTS HELP MADE EASY

Use this form or CALL US TOLL FREE at 1-866-247-1092 Monday through Saturday BETWEEN THE HOURS OF 9AM and 5PM All US Time Zones

Your Name
Your email
Your Contact Phone Number including area code/country code

Your zipcode (so we can calculate shipping at the lowest rate possible)

Select your marine engine's make.

enter your marine engine's serial number
To help us better serve your needs by assuring you get the correct part for your marine engine, please enter your engine's serial number. If you don't know where to find your serial number or if the sticker or plate is missing, please call us Toll Free so we can help you isolate exactly what engine you have to insure you get the right part, service manual, or repair manual.

enter your marine engine's horse power
To help us better serve your needs by assuring you get the correct part for your marine engine, please enter your engine's horsepower. If you don't know, please call us Toll Free so we can help you isolate exactly what engine you have to insure you get the right part, service manual, or repair manual.

enter your marine engine's model if you know it. VERY IMPORTANT FOR YAMAHA ENGINES

enter your marine engine's year if possible

part or manual needed

Describe the part or manual you need to the best of your ability and/or knowledge.

additional comments?

You can add any additional comments or message to us here.

PRIVACY GUARANTEE: Absolutely NONE of the information you provide us will be sold or diseminated to any other individual or company or group.* Read our full Privacy Guarantee.

You are probably looking for the home page: Click here or the big logo at the top.

Yamaha outboard parts and service manuals PLUS Mercury outboard parts and service manuals -- HISTORY FILE 1999A beginning end of 1999 after network crash

--------------------------------------------------------------------------

Subject: 1990 Mariner 115hp - parts

Mike;

The gasket kits are included in the carb repair kits. The #1395-9602 gasket
kit is now #1395-811223 and your cost is $3.55 per kit. The #1395-9598 plate
is no longer available from Mercury. The #1395-9589 plate is now
#1395-811221 and your cost is $5.05 each.

The carb repair kits #1395-9599 and #1395-811222 both now are
#1395-823635--4 and your cost is $22.30 each. The cover screws #1395-9597
are $0.65 each. The cover screws #1395-811220 are $0.55 each.

The float bowl #1395-9594 now is #1395-811693 and your cost is $32.95. the
screws #1399-5132 now are #1395-808612 and your cost is $0.65 each. The
plugs #1395-9596 are $11.90 each.

Please let me know those items that you want to order.

--------------------------------------------------------------------------

Subject: 1979 Mercury 150hp - trim limit switch

Jim;

Based on the Serial #A8055416 that you provided, your 150hp was probably
built in Australia. A new tilt limit switch that is mounted near the top of
the clamp bracket, retails for $34.85 and your cost is $29.25.

The trim sender switch that is mounted lower on the clamp bracket/ swivel
bracket and is used to send signals to a trim guage, retails for $94.50 and
your cost is $79.20.

Priority Mail with handling would cost $5.00. I do not have either of these
switches in stock at this time. My orders from Mercury take 4 to 5 working
days to get here, and are sent to you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1966 Chrysler 50hp - parts

David;

New Chrysler vent and fill plugs retail for $5.15 and your cost is $4.35
each. New washers for the plugs are $0.45 each. A new reverse lock and the
springs are no longer available from Mercury. A Chrysler new single lever
remote control box from Mercury, retails for $217.35 and you cost is $182.55
plus $9.65 for UPS shipping.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 P7acific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: Mounts and tilt pin

Don;

The mounts that you recieved were purchased from Mercury in Jan. of 1973
under the part #33975 which Mercury later changed to #85003. They have
been
in my new Mercury inventory since 1973 and came from Mercury as new parts.
These mounts are no longer available from Mercury and should you wish to
return them, you are welcome to do so for a full refund.

The only way to determine the correct tilt pin is by the # of holes in the
bracket.

--------------------------------------------------------------------------

Subject: 1971 Chrysler 120hp - drive shaft seal

Scott;

A new Chrysler drive shaft seal from Mercury, retails for $17.35 and your
cost is $13.90 plus $5.00 for Priority Mail with handling.

Not in stock right now, my orders from Mercury take 4 to 5 working days to
get here, and are sent to you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1990 Mariner 25hp - electric start conversion

Robert;

Your request was forwarded to me by Bill Kelly - Mastertech.

A new Mariner electric start kit for your 1990 Mariner 25hp, that includes
all the parts needed to convert to electric start, except for the start
button, retails for $225.70 and your cost is $180.55. A new start button kit
that mounts on the tiller arm, retails for $30.55 and your cost is $24.45.
Shipping is not included and the weight of the 2 kits is 9 lbs. Priority
Mail with handling to puerto Rico would cost $15.00.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1994 Yamaha 25hp - motor cover

Allen

I do not have a good used motor cover for your Yamaha 25hp. A new one
complete with decals and hardware, retails for $262.58 and your cost is
$221.20 plus $13.42 for UPS shipping.

Not in stock, my orders from Mercury take 4 to 5 working days to get here,
and are sent to you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: Mercury 4hp - coils

Steve ;

Your request wa "s forwarded to me by Bill Kelly - Mastertech.

New Mercury ignition coils, part # 339-5288T2 retail for $46.95 and your
cost is $37.55 each. Priority Mail with handling would cost $5.00.

I do have 2 of these coils in stock at this time. My orders from Mercury
take 4 to 5 working days to get here, and are sent to you the same day the
order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: Mariner 30hp - head gasket

Ralph Deaver ;

Your request was forwarded to me by Bill Kelly - Mastertech.

A new Mariner head gasket from Mercury, retails for $30.45 and your cost is
$24.40. A new carb repair kit retails for $39.05 and your cost is $31.20.
Priority Mail with handling would cost $5.00.

Not in stock right now, my orders from Mercury take 4 to 5 working days to
get here, and are sent to you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 5hp Mariner parts

Robert;

Your request was forwarded to me by Bill Kelly - Mastertech.

The following parts are new Mariner parts from Mercury :

Prop shaft seal --$6.30
Gear shift lever (plastic molded to a knurled metal shaft) --$22.90
fuel pump diaphram assembly --$8.35
lower unit seal --$5.75
fuel pump gasket --$2.95
lower unit gasket --$2.10
power head gasket --$3.85
any gasket required to replace shift lever -- none needed

Not in stock right now, My orders from Mercury take 4 to 5 working days to
get here, and are sent l5 to you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1987 Mariner 5hp - remote controls

Wayne ;

Your request was forwarded to me by Bill Kelly - Mastertech. Mercury does
not have a remote control option for your 1987 Mariner 5hp.

--------------------------------------------------------------------------

Subject: Yamaha fuel flow meter

Neil;

Your request was forwarded to me by Bill Kelly - Mastertech.

A new fuel flow meter, #6Y5-W0088-63-00 from Yamaha, retails for $861.87
and your cost would be $750.65 plus $10.35 for Airmail postage to Burmuda.

Not in stock right now, my orders from Yamaha take 5 to 7 working days to
get here, and are sent to you the same day the parts arrive.

Should you wish to order, please call 208-263-1468 Pacific time. MasterCard,
Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1973 Mercruiser 165hp - service and owner's manual

Bill;

I do have in stock the Mercruiser service manual for your 165hp. This is the
same service manual as the one we use in our service shop and it is
published by Mercury. Your cost is $40.00 including postage.

The Mercruiser owner's manual, $17.00 inc. postage, is not in stock at this
time. My orders from Mercury's Publication Division, take 6 to 7 working
days to get here and are sent to you the same day they arrive.

Should you want to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1988 Force 50hp - parts

Bill;

AJL new Force forward gear would cost you $140.10. A new Force clutch is
$55.95 and a lower Force lower unit seal & gasket kit is $12.45.

Not all of the above parts are in stock at this time. My orders from Mercury
take 4 to 5 working days to get here, and are sent to you the same day the
order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1989 Mercury 40hp - power trim/tilt motor

Len;

The original electric motor that was used on your power trim & tilt systam,
is no longer available as the company that made it is no longer in business.
Mercury does have a new replacement motor kit for your unit that retails for
$367.75 and your cost is $308.90 plus $10.73 for UPS shipping.

Not in stock right now, my orders from Mercury take 4 to 5 working days to
get here, and are sent to you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1975 Mercury 20hp - electric starter

Jimmy;

The electric starters are no longer available from Mercury and I do not have
any used, or rebuilt ones at this time. Sorry but I have not been able to
find any other sources for these electric starter motors.

--------------------------------------------------------------------------

Subject: 7.5 hp Elgin coil

Stephanie;

Sorry but I do not have access to Elgin parts, in either new or used
condition.

--------------------------------------------------------------------------

Subject: 1993 Mariner 2.5hp - fuel tank

Jerome;

By the Serial # OD929049 that you provided, your 2.5hp Mariner was built in
1993. I do not have a good, used fuel tank in stock at this time. A new one
including the cap from Mercury, retails for $60.60 and your cost is $54.50
plus $7.40 for UPS shipping.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1987 Mercury 35hp - stator

David ;

By the Serial df# OB189330 that you provided, your 35hp Mercury was built in
1987. A new Mercury stator with bullet style electrical connectors, retails
for $109.55 and your cost is $95.30 plus $5.00 for Priority Mail with
handling.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: Yamaha 4 stroke - 100hp

David;

Both Mercury and Yamaha have stipulated to their dealers that we can only
sell new outboards in our sales and service territory. Selling outside of my
territory will result in the loss of my dealership with either company.

--------------------------------------------------------------------------

Subject: 1988 Force 50hp - service manual

Bill;

I do have in stock, the Force service manual for your 50hp. Your cost is
$40.00 including postage. This Force service manual is the same as the one
we use in our service shop and it is published by Mercury.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 8hp Seacraft - service manual and parts

Terry;

Sorry but I do not have any sources for service manuals or parts for
Seacraft engines.

--------------------------------------------------------------------------

Subject: 1978 Chrysler 85hp - piston

Greg;

By the Model # 859B8A that you provided, your 85hp Chrysler was built in
1978. A new Chrysler standard size piston from Mercury, retails for $120.60
and your cost is $101.25. New oversize pistons in either 0.010 or 0.030"
sizes, retails for $102.258 and your cost is $85.95 each. Airmail postage to
Canada including handling would cost $8.94.

Not carried in stock, my orders from Mercury take 4 to 5 working days to get
here, and are sent to you the same day the order arrives.

Should you wish to order, p{\lease call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1961 Mercury 50hp - piston

Chuck;

Your request was forwarded to me by Bill Kelly - Mastertech.

New #724-1631A2 pistons are no longer available from Mercury. I do have 4
each, good, used pistons for $59.85 each. When last available from Mercury
they were $149.65 each. Priority Mail with handling would cost $5.45.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1993 Mercury 3 cyl. 75hp - parts

George;

Thank you for your phone call. I just got back from service school and am
catching up on email requests. Mercury changed their parts prices the first
of Febuary so here are the revised prices for the parts.

1 Forward gear - $162.70
1 Reverse gear - $154.85
1 Pinion gear - $98.60
1 Lower unit gasket set - $44.65
1 Spring [for cam follower in prop shaft and 3 metal balls] - $2.30
1 Drain plug with magnet - $4.80
1 Pinion gear locking nut - $3.20

Priority Mail with handling to Salt Lake City, UT would cost $9.05. If the
new Mercury parts were ordered tomorrow from Mercury, there would be enough
time for me to get them to Salt Lake City by the 28th of Febuary.

Please let me know by Email should you want to order.

--------------------------------------------------------------------------

Subject: 1988 Force 50hp - service manual mailed

Bill;

Just to let you know that the Force service manual is being mailed to you
this afternoon. Your bankcard has been charged for $40.00.

--------------------------------------------------------------------------

Subject: parts sent UPS

Mike;

Most of the parts that you ordered were sent to you this afternoon by UPS.
The parts came to $479.80 and UPS shipping was $9.09. Your bankcard has been
charged for $488.89.

6 each of the screws, part #1395-811220 are on backorder and the
#32-99127109 hose, which now is part #32-830756109 is backordered. I will
send these items when they arrive.

The UPS tracking # is : 1Z 367 6XW 43 4430 8966.

--------------------------------------------------------------------------

Subject: 1994 Force 15hp - parts sent

Doug;

Just to let you know that the insert and gasket arrived from Mercury and
have been sent to you by Priority Mail this afternoon. The parts were $18.70
and Priority Mail with handling was $5.00. Your bankcard has been cahrged
for $23.70.

--------------------------------------------------------------------------

Subject: 8hp Mercury - tool sent

Ron;

Just to let you know that the Mercury tool arrived today and has been sent
to you this afternoon by Priority Mail. The tool was $50.40 and Priority
Mail with handling $5.45. Your bankcard has been charged $55.85.

--------------------------------------------------------------------------

Subject: 1992 Gamefisher 9.9hp - prop sent

John;

Just to let you know that the new prop for your 9.9hp was sent to you by
Priority Mail, yesterday afternoon. The prop was $42.00 and Priority Mail
with handling $5.00. Your bankcard has been charged $47.00.

Subject: 1981 Mercury 25hp carb rebuild kit sent

John;

Just to let you know that the Mercury carb rebuild kit was sent to you
yesterday afternoon, by Priority Mail. The part was $23.25 and Priority Mail
with handling $5.00. Your bankcard has been charged for $28.25.

--------------------------------------------------------------------------

Subject: 1961 Mercury 50hp - used piston sent

Chuck;

Just to let you know that the used Mercury piston was sent to you yesterday
afternoon by Priority Mail. The piston was $59.85 and Priority Mail with
handling $5.45. Your bankcard has been charged for $65.30.

--------------------------------------------------------------------------

Subject: Re: lancer 45 foot motor boat

Sorry but I do not have any sources for Perkins manuals at this time.

Subject: lancer 45 foot motor boat

i have a 1986 lancer motor boat with twin diecel perkins twin turbo 350 hp.
looking for books for same, also need book on Vdrives how to R&R.
looking foward to hearing from you .
thank you BUD

Sorry but I do not have any sources for Perkins
manuals at this time.

--------------------------------------------------------------------------

Subject: Re: bumble bee

Sorry but I do not have any sources for parts for Tanaka outboards.

--------------------------------------------------------------------------

Subject: bumble bee

partes for tanaka out board motor

--------------------------------------------------------------------------

Subject: Re: merinerepower italian company

Both Mercury and Yamaha have stipulated to their dealers that we can only sell new outboards in our sales and service territory. Selling outside of my territory will result in the loss of my dealership with either company.

Sorry, but I am unable to help yolu.

Subject: merinerepower italian company

Marinerepower is an italian company specialized in marine engines resales, we are searching an american partner company interested in to sell us outboard and sterndrive engine, we abitually buy more than 400 engine for year, if u think your conditions can be interesting for us , please conatct us and give us some quote on the following material.
Mercury 300 optimax 4 pieces
mercury 150 optimax 20 pieces
mercury 200 optimax 12 pieces
mercury 135 optimax 10 pieces
mercruise 4,3 efi 10 pieces
mercruiser 5,7 magnum 4 pieces
mercruiser 496 6 pieces
thanks in advance and best regards
Francesco Berti

Both Mercury and Yamaha have stipulated to their
dealers that we can only sell new outboards in our sales and service territory.
Selling outside of my territory will result in the loss of my dealership with
either company.

Subject: merinerepower italian
company

Marinerepower is an italian company specialized
in marine engines resales, we are searching an american partner company
interested in to sell us outboard and sterndrive engine, we abitually buy more
than 400 engine for year, if u think your conditions can be interesting for us,
please conatct us and give us some quote on the following
material.Mercury 300 optimax 4 piecesmercury 150 optimax 20
piecesmercury 200 optimax 12 piecesmercury 135 optimax 10
piecesmercruise 4,3 efi 10 pieces mercruiser 5,7 magnum 4
pieces regardsFrancesco Berti

--------------------------------------------------------------------------

Subject: Re: 200 yamaha and merc

Both Mercury and Yamaha have stipulated to their dealers that we can only sell new outboards in our sales and service territory. Selling outside of my territory will result in the loss of my dealership with either company.

--------------------------------------------------------------------------

Subject: 200 yamaha and merc

Can I get your prices on a 200 hp merc efi and yamaha saltwater engines.

Both Mercury and Yamaha have stipulated to their
dealers that we can only sell new outboards in our sales and service territory.
Selling outside of my territory will result in the loss of my dealership with
either company.

Subject: 200 yamaha and merc

Can I get your prices on a 200 hp merc efi and
yamaha saltwater engines.

--------------------------------------------------------------------------

Subject: Re: Price quote on Yamaha T8 outboard

Both Mercury and Yamaha have stipulated to their dealers that we can only
sell new outboards in our sales and service territory. Selling outside of my
territory will result in the loss of my dealership with either company.

--------------------------------------------------------------------------

Subject: Price quote on Yamaha T8 outboard

I am interested in purchasing a Yamaha T8 outboard (20 inch shaft) with
remote control (including hookups to motor for shift, throttle, starting,
tilt etc) and throttle/shift cables. I can supply my own steering
linkage.
I need a pZrice quote and shipping estimate to Minneapolis MN area (zip is
55304)

--------------------------------------------------------------------------

Subject: Re: used outboard motors

Sorry but at this time, I do not have any used 150hp outboards in stock.

--------------------------------------------------------------------------

Subject: used outboard motors

dear sirs
please contact me with any information regarding
a used 150 h.p. outboard merc, honda, johnson, or evinrude.
preferably a four stroke, but at least 150 horses
the boat is an 18 ft. ski boat
thanx
--
Kurt

--------------------------------------------------------------------------

Subject: Fw: Parts Request Form

--------------------------------------------------------------------------

Subject: Re: 90 hp mercury 4 stroke

Both Mercury and Yamaha have stipulated to their dealers that we can only sell new outboards in our sales and service territory. Selling outside of my territory will result in the loss of my dealership with either company.

Subject: 90 hp mercury 4 stroke

I am a marine repair business in Dayton Nv. I have a customer that wants to repower I need the price on the motor and controlls.

thank you

Dick

Both Mercury and Yamaha have stipulated to their
dealers that we can only sell new outboards in our sales and service territory.
Selling outside of my territory will result in the loss of my dealership with
either company.

Subject: 90 hp mercury 4 stroke

I am a marine repair business in Dayton Nv. I have a
customer that wants to repower I need the price on the motor and
controlls.

thank you

--------------------------------------------------------------------------

Subject: Re: Outboard motor prices

Jim;

Both Mercury and Yamaha have stipulated to their dealers that we can only
sell new outboards in our sales and service territory. Selling outside of my
territory will result in the loss of my dealership with either company.

--------------------------------------------------------------------------

Subject: Outboard motor prices

Greetings,
Could you please provide me with price quotes for the all of the115
and 135 hp outboards that you handle (for Mercury, both the OptiMax and
the standard motors)? I am interested in saltwater use. By the way, I
live in Helena and want a flats boat for use in the Lower Keys. Thanks
for your help, Jim

--------------------------------------------------------------------------

Subject: Fw: Parts Request Form

--------------------------------------------------------------------------

Subject: 1978 Mercury 20hp - lower unit

Kenneth;

Sorry but I do not have at this time, a good, used or rebuilt lower unit in
either short or long shaft versions. New complete lower units are no longer
available from Mercury and many of the parts, gear housing etc. are no
longer available new.

--------------------------------------------------------------------------

Subject: 1985 Mercury 9.8hp - lower unit gearcase

Nathan;

I do not have a good, used lower unit gear housing for your 9.8hp Mercury. A
new Mercury gear housing retails for $273.00 and your cost would be $221.40
plus $10.89 for UPS shipping.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1995 Mariner 60hp - motor cover

Gary;

Your request was forwarded to me by Bill Kelly - Mastertech.

I do not have a good, used motor cover for your 1995 Mariner 60hp. A new
one from Mercury not including decals, retails for $422.95 and your cost is
$355.60. A new decal set retails for $71.75 and your cost is $61.65. UPS
shipping would cost $19.89.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1992 Force 120hp - parts list & parts

Don;

I do have the Force parts list in stock for your 120hp Force. Your cost
including postage is $17.00. A new Force starter, retails for $218.05 and
your cost is $183.40 plus shipping.

A new Force exhaust tube that is located just below the powerhead, retails
for $82.10 and your cost is $68.95 plus shipping. The 6 bolts, no washers
used, retail for $2.10 each and your cost is $1.70 each.

A new Force water pump kit from Mercury, retails for $95.75 and your cost is
$75.60. UPS shipping for the abbdove parts would cost $14.07.

Not all of the above parts are in stock right now. My orders from Mercury
take 4 to 5 working days to get here, and are sent to you the same day the
order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1979 Mercury 20hp - cowling

Matt;

The front cowling for your 20hp is no longer available from Mercury and I do
not have a good, used one in stock at this time. The wrap around cowling is
also no longer available and retailed for $216.40 when last available. I do
have one good, used wrap around cowling for $86.55 plus $8.66 for UPS
shipping.

The top cowl is no longer available from Mercury and I do not have a good,
used one at this time.

--------------------------------------------------------------------------

Subject: 1996 Mercury 120hp Sportjet - parts

Skip ;

I do have in stock the new Mercury red stator, part #398-832075A4 for your
120hp Sportjet. It retails for $176.30 and your cost is $148.10. A new
Mercury trigger assy., part #828303A1 retails for $45.10 and your cost is
$39.20. UPS shipping for both parts would cost $9.04.

The new Mercury trigger assy. is not in stock right now. My orders from
Mercury take 4 to 5 working days to get here, and are sent to you the same
day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: Re: Motor Mercury

Julio;

Sorry but I do not have any Mercury service manuals in Spanish, as they are not available from Mercury in the USA. Check with a Mercury dealer in your country.

Subject: Motor Mercury

Dear sir
conocer si tienen el manual en para reparaciones mec=E1nicas del motor fuerabord Atentamente:
Julio
------------------------
Dear Sirs:
He/she would want to know if they have the manual in Spanish for mechanical repairs of the motors it was overboard Mercury 50 (4-Stroke) of four times because it would be intersado in acquiring it.
Sincerely:
Julio

Julio;

Sorry but I do not have any Mercury service man\}luals
in Spanish, as they are not available from Mercury in the USA. Check with a
Mercury dealer in your country.

--------------------------------------------------------------------------

Subject: Re: Sears Gamefisher outboard

I do not handle Sears, Gamefisher outboards, so I do not have access to any parts or service manuals for these engines.

Subject: Sears Gamefisher outboard motor

We have purchased a 5 HP Gamefisher motor,used. I need to know who manufactored this motor and info on parts and instructions on maintenance. Thanks

I do not handle Sears, Gamefisher outboards, so I
do not have access to any parts or service manuals for these
engines.

Sorry, but I am unable to help you with your
request.

Subject: Gamefisher outboard motor

We have purchased a 5 HP Gamefisher motor,used. I
need to know who manufactored this motor and info on parts and instructions on
maintenance.

--------------------------------------------------------------------------

Subject: Re: New Outboard

Ken;

A new 2001 Mercury 5hp short shaft, 2 cycle outboard would cost $1008.00
plus $23.02 for UPS shipping.

A new 2001 Mercury 6hp short shaft, 4 stroke outboard would cost $1533.00
plus $26.83 for UPS shipping. Both are in stock at this time.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: New Outboard

I looking for a new Outboard Motor, Shortshaft.
What is your best price on a 5 hp 2 cycle
or a 6 hp 4 cycle, shipped to Laguna Niguel, California 92677 !?

Thanks,
Ken

--------------------------------------------------------------------------

Subject: 1985 Mercury 150XR2 - parts

Bruce;

Your request was forwarded to me by Bill Kelly - Mastertech.

I do not have a good, used set of gears for your 1985 Mercury 150XR2. A new
Mercury forward and reverse gear set, retails for $419.70 and your cost is
$352.25. A new Mercury pinion gear retails for $150.25 and your cost is
$126.25.

A new Mercury gasket and seal kit for the lower unit, retails for $53.05 -
your cost $39.80. The reverse gear bearing retails for $34.55 - your cost
$25.95. The forward gear bearing retails for $56.30 - your cost $42.20.

A new Mercury pinion gear bearing retails for $38.45 - your cost $28.85. A
new Mercury drive shaft bearing retails for $21.45 - your cost $16.15. UPS
shipping for all of these parts would cost $14.35.

Not all of the above parts are in stock right now. My orders from Mercury
take 4 to 5 working days to get here, and are sent to you the same day the
order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: Re:

Steve ;

Your request was forwarded to me by Bill Kelly - Mastertech.

Sorry but I do not know of any Mercury parts that would provide better performance for your 25hp. Mercury seldom offers performance upgrades for their outboards, as they would rather have you buy a higher hp model.

Subject: Re:

Aloha - -

I don't have easy access to these OEM parts so I am
forwarding this to my associate at Ellisport
Bay Marine for assistance.

Thank you for checking with MASTERTECH!

Hello.
I have a mercury EL25 made this year.
It is installed on a 14 pontoon boat.
What im looking for is any upgrades made for this motor
to get more power out of it.
Are there any better props or carbs I can use.
Please e-mail me with any information you might have.
Thank You
Steve

Sincerely, BILL KELLY The "MASTERTECH" in Paradise.
Your definitive marine parts supplier & technical guru on line.

Steve ;

Your request was forwarded to me by Bill Kelly -
Mastertech.
Sorry but I do not know of any Mercury parts
that would provide better performance for your 25hp. Mercury seldom offers
performance upgrades for their outboards, as they would rather have you buy a
higher hp model.

--------------------------------------------------------------------------

Subject: Re:
Aloha - -I don't have easy access to these OEM parts lso
I amforwarding this to my associate at EllisportBay Marine
for assistance.Thank you for checking with MASTERTECH!At 08:14
AM 02/08/2001 -0800, you wrote:
Hello.I have a mercury EL25 made this year.It is
installed on a 14 pontoon boat.What im looking for
is any upgrades made for this motorto get more power
out of it.Are there any better props or carbs I can
use.Please e-mail me with any information you might
have.

Thank You

Steve
Sincerely, BILL KELLY The "MASTERTECH" in
Paradise. Your definitive marine parts supplier technical guru
on line.

--------------------------------------------------------------------------

Subject: Re: New Outboard

Ken;

I do have one new Mercury, still in it's shipping container, 2 cycle 6hp, 2
cyl. short shaft outboard for $1063.00 plus $41.99 for UPS shipping. This 6
hp comes with a 3 gal fuel tank and it's shipping weight is 85 lbs. - net
weight is 74 lbs.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: Re: 1967 Evinrude 6hp - parts

Dave;

I am a dealer for Yamaha, Mercury, Force, Mariner, Mercruiser and Volvo
parts, both new and some used.

--------------------------------------------------------------------------

Subject: Re: 1967 Evinrude 6hp - parts

Larry:

Thanks for your help. For future reference, what lines/stuff do you
carry,
and what do you specialize in???

Dave

--------------------------------------------------------------------------

Subject: Force 50hp owner's manual mailed

Robert;

Just to let you know that the Force owner's manual for your 50hp, was mailed
to you on Friday, Feb. 23rd. Your bankcard has been charged for $17.00.

--------------------------------------------------------------------------

Subject: Mercruiser owner's manual mailed

William;

Just to let you know that the Mercruiser owner's manual for your 160hp, was
mailed to you on Friday, Feb. 23rd. Your bankcard has been charged for
$17.00.

--------------------------------------------------------------------------

Subject: 1991 Force 85hp - service & owner's manual mailed

Max Brewbaker ;

Just to let you know that the Force service manual and owner's manual were
mailed to you on Friday, Feb. 23rd. Your bankcard has been charged for
$57.00.

--------------------------------------------------------------------------

Subject: 1972 Mercruiser 120hp - manuals & parts list mailed

Steve;

Just to let you know that the Mercruiser service manual, owner's manual and
parts list, were mailed to you Friday, Feb. 23rd. Your bankcard has been
charged for $74.00.

--------------------------------------------------------------------------

Subject: 1966 Chrysler 50hp - parts sent UPS

David;

Just to let you know that the parts were sent to you by UPS on Friday, Feb.
23rd. The parts were $212.30 and UPS shipping was $9.65. Your bankcard has
been charged for $221.95.

The UPS tracking # is : 1Z 367 6XW 03 4497 5972.

--------------------------------------------------------------------------

Subject: 1993 Mercury 75hp - parts sent to Alex Smith

George;

The new Mercury parts were sent to Alex Smith in Salt Lake City, UT, on
Friday, Feb. 23rd. He should recieve them either today the 26th or tomorrow.
The parts were $471.10 and Priority Mail with handling $9.05. Your bankcard
has been charged for $480.15 in US funds.

--------------------------------------------------------------------------

Subject: 1990 Mariner 115hp - carb part

Mike;

The brass seat for the inlet needle is not available from any sources that I
know of. A new WME 21B carb from Mercury, retails for $268.55 and your cost
is $226.30. All 4 carbs, top to bottom are still available and are the same
price. Sorry but I do not have a good, used one at this time.

--------------------------------------------------------------------------

Subject: 1971 Chrysler 318 parts

Chuck ;

Sorry but I do not have any sources for Chrysler Marine engine parts. The
only Chrysler parts that I have sources for are their outboards.

Check with the following company as they may be able to help you.

Marysville Marine
1551 Michigan Ave.
Marysville, MI 48040
(810) 364-7653

--------------------------------------------------------------------------

Subject: 1969 Mercury 35hp lower unit

Patrick;

Sorry but at this time, I do not have either a short or long shaft complete
lower unit for your 35hp. By the serial # 2673484 that you provided, your
35hp Mercury was built in 1969. New lower units are no longer available from
Mercury.

--------------------------------------------------------------------------

Subject: 1973 Mercury 4hp - service manual

Michael;

I do have in stock, Mercury's service manual for your 1973 4hp. Your cost is
$40.00 including postage. This Mercury service manual is the same as the one
we use in our service shop.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1985 Force 85hp service manual

Daniel;

I do have in stock the Force service manual for your 1985 Force 85hp. Your
cost is $40.00 including postage. This Force service manual is the same as
the one we use in our service shop and is published by Mercury.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1967 Mercury 50hp - service manual

John;

By the Serial # 2159847 that you provided, your 50hp Mercury was built in
1967. I do have in stock, Mercury's service manual for your 50hp. Your cost
is $40.00 including postage. This is the same service manual that we use in
our service shop and is published by Mercury.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1984 Mercury 25XD - powerhead

Brian;

By the Serial # 6470224 that you provided, your 25hp Mercury was built in
1984. I do not have a good, used or rebuilt powerhead in stock at this time.
A new one from Mercury, retails for $1395.45 and your cost is $1221.25 plus
$28.92 for UPS shipping.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1974 Mercruiser 165hp exhaust manifold

Jeff;

Sorry but I do not have any good, used exhaust manifolds for your 165hp. A
new on from Mercury retails for $587.10 and your cost is $512.50 plus $39.37
for UPS shipping.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1984 Ward's Sea King 4hp - ignition coil

Dave;

I do have in stock a new Chrysler ignition coil for your 4hp. New from
Mercury, it retails for $96.75 and your cost is $77.35 plus $5.45 for
Priority Mail with handling. By the Model # VWB 52004F that you provided,
your 4hp was built in 1984.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1985 Force 50hp - powerhead

Pete;

The parts you are refering too are the powerhead that includes the block,
crankshaft, pistons, rods Etc. . I do not have a good, used or rebuilt
powerhead for your 50hp at this time. New blocks and powerheads are no
longer available from Mercury for your 1985 Force 50hp.

--------------------------------------------------------------------------

Subject: Re: merinerepower italian company

Sorry but my Mercury and Yamaha sales/service territory consists of only a
50 mile radius within the State of Idaho. Both Mercury and Yamaha track my
sales by new outboard registrations.

--------------------------------------------------------------------------

Subject: Re: merinerepower italian company

Thanks we have no problem for that we also own an american company that
will be able to buy material directly from you , please if you are
interested in give us your best quote.
Thanks again
Francesco
Both Mercury and Yamaha have stipulated to their dealers that we can
only sell new outboards in our sales and service territory. Selling
outside of my territory will result in the loss of my dealership with
either company.

Subject: merinerepower italian company

Marinerepower is an italian company speci69alized in marine engines
resales, we are searching an american partner company interested in to
sell us outboard and sterndrive engine, we abitually buy more than 400
engine for year, if u think your conditions can be interesting for us ,
please conatct us and give us some quote on the following material.
Mercury 300 optimax 4 pieces
mercury 150 optimax 20 pieces
mercury 200 optimax 12 pieces
mercury 135 optimax 10 pieces
mercruise 4,3 efi 10 pieces
merc9ruiser 5,7 magnum 4 pieces
mercruiser 496 6 pieces
thanks in advance and best regards
Francesco Berti

z

--------------------------------------------------------------------------

Subject: 1998 Mercury 40hp - manual

Rev. Jerry;

The owner's manual for your 40hp Mercury, is available from Mercury for
$17.00 including postage. Not in stock at this time, my orders from
Mercury's Publication Division, take 6 to 7 working days to get here and are
sent to you the same day they arrive.

I do have in stock the Mercury service manual - $40.00 and Parts list -
$17.00 for your 40hp. Postage is included in the prices.

Should you want to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcard
--------------------------------------------------------------------------

Subject: 1989 Mariner 75hp - temp sender

Doug;

By the Serial # OC135660 that you provided, you 75hp Mariner was built in
1989. I do have in stock a new Mariner temp sender, part #78799 for your
75hp Mariner. It retails for $38.25 and your cost is $32.60 plus $5.00 for
Priority Mail with handling.

Should you want to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

1998 Mercury 40hp - manual
1989 Mariner 75hp - temp sender
1985 Force 50hp - parts
1989 Mercury 150 XR 4 - switch boxes
1988 Force 50hp - manuals & parts list sent
1996 Mercury 120hp Sport Jet- stator & trigger sent UPS
1998 Mercury 175hp Sport Jet - switchboxes sent Priority Mail
Yamaha parts
1973 Mercury 50hp - switchbox
1969 Mercury 50hp - lower unit seal kit
1975 Mercury 20hp powerhead
1979 Mercury 9.8hp - parts
1985 Mercury 25hp - swivel bracket
1984 Mariner 25hp carb part
1999 Mercury 150hp - service manual
1974 Chrysler 75hp - parts
5hp Mariner parts sent Priority Mail
1985 Suzuki 85hp parts
Re: need parts
Yamaha sterndrive parts
Yamaha Outboard engine
Parts Request Form
1988 Force 50hp - parts
1988 Mercruiser 3.0L - flywheel
1974 Mercury 85hp - internal wiring harness
1967 Mercury 3.9hp - carb
Sears 15hp - manual & parts list
1988 Force 125hp - trim & tilt motor
1991 Mariner 40hp - impeller
1972 Mercury 50hp - internal wiring harness
2001 Mercury 75hp - service manual
1967 Mercury 65hp - lower unit housing
1967 Mercury 50hp - service manual sent
1984 Force 85hp - thermoswitch
1976 Mercury 7.5hp - parts list
Re: powerhead
1991 Mercury 115hp - tilt/trim motor
50hp Mercury 4 stroke - service manual
1985 Mercury 90hp - service manual
FIND A REPLACEMENT PART FOR MY MARINER MOTOR
Re: Need parts
1985 Mariner 40hp - starter
1979 Mercruiser 898 - owner's manual
1993 Mercury 75hp - parts
Question
1986 Mariner 90hp - service manual & parts list mailed
1987 Yamaha 70hp - parts
1994 Mercury 60hp gaskets
1994 Force 40hp - parts
1987 Force 85hp - parts
1988 Mercury 100hp - trim/tilt motor
1990 Force 120hp L-Drive - exhaust manifold
1986 Mercury 3 cyl. 50hp - service manual
2000 MCM 7.4L MPI - service manual
1985 Mercury 7.5hp - water pump
1976 Mercury 7.5hp - parts
1990 Force 120hp - complete gearbox
1986 Mariner 40hp - start solenoid
Parts Request Form
1986 Mariner 90hp - service manual & parts list mailed
1985 Mercury 90hp - service manual mailed
1992 Yamaha 90hp - partsX1992 Yamaha 90hp - parts
1989 Force 50hp - parts
1998 Mercury 200EFI-CXI - lower unit
1979 Chrysler 50hp Ignition coil
1984 ? Mercury 175hp - lower unit
1968 Mercury 20hp - parts
1966 Mercury 110hp - service manual
1988 Mercury 25hp - service manual
61 merc 700
1979 Mercury 7.5hp - parts
1984 Force 125hp - powerhead gasket set
1992 Mercruiser 7.4Litre/Bravo - Manuals
1995 Mariner 50hp - manuals
Yamaha
1997 Mercruiser 3.0L 130hp - parts
1988 Mercury 100hp - parts
1974 Chrysler 10hp - service manual
1992 MCM service manuals & parts lists sent 2nd day UPS
Chrysler parts sent Priority Mail
Mercury starter drive sent Priority Mail
Force clutch & lower unit seal kit sent Priority Mail
Chrysler 120hp oil seal sent Priority Mail
Force bearing cage & roller set sent Priority Mail
1971 MCM 165hp valve cover gasket
1983 Chrysler 130hp
1988 Force 125hp - parts
1983 Mercury 200hp - parts
Mercury parts
Old Outboard Motor
1988 Nissan 15hp outboard cover@
chrysler 318 intake manifold
Champion 4.2hp parts
new motor
Mercury 140 jet
1988 Mariner 20hp - stator
Yamaha props

--------------------------------------------------------------------------

Subject: 1985 Force 50hp - parts

Pete;

The stator and the breaker plate assy. are no longer available from Mercury
for your 50hp Force outboard. I do not have either of these parts in good,
used condition at this time. New points are $23.25 each and condensors are
$24.55 each, 2 each of both are used on your 50hp.

Check with Fairwinds Marina they may be able to help you with used parts.

Fairwinds Marina Inc.
1000 Fairwinds Drive
Annapolis, MD, 21401
(410) 974 - 0758

--------------------------------------------------------------------------

Subject: 1989 Mercury 150 XR 4 - switch boxes

Randy;

I do have in stock, 2 new Mercury switch boxes, part #332-7778A12. They
retail for $193.55 each and your cost is $145.15 each. Priority Mail with
handling for 2 switch boxes would cost $5.45. These are new switch boxes
made by Mercury.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

Subject: 1988 Force 50hp - manuals & parts list sent

Paul;

Just to let you know that the Force service manual, owner's manual and parts
list were mailed to you on Tuesday, Feb. 27th.. Your bankcard has been
charged for $74.00.

--------------------------------------------------------------------------

Subject: 1996 Mercury 120hp Sport Jet- stator & trigger sent UPS

Skip;

Just to let you know that the new Mercury stator and trigger assy., were
sent to you by UPS, yesterday afternoon. The parts were $187.30 and UPS
shipping $9.04. Your bankcard has been charged for $196.34.

The UPS tracking # is : 1Z 367 6XW 03 4448 8187

--------------------------------------------------------------------------

Subject: 1998 Mercury 175hp Sport Jet - switchboxes sent Priority Mail

Alberto;

Just to let you know that 2 new Mercury switchboxes were sent to you
yesterday afternoon by Priority Mail. Your bankcard has been charged for a
total of $450.00.

--------------------------------------------------------------------------

Subject: Yamaha parts

Egor;

Recieved your order for the 3 bearings, 2 oil seals and 2 cable ends. They
have been ordered and will be sent to you as soon as I recieve them from
Yamaha.

The following are the prices for the other Yamaha parts you requested :

6H3-12413-00-9M COVER,THERMOSTAT 1 item - $18.40 each
6H3-11610-00 PISTON RINGSET STD 3 item - $30.95 each
6H3-44311-00 HOUSING,WATER PUMP 1 item - $10.40 each
6H3-44315-A0 GASKET,WATER PUMP 1 item - $2.20 each
6H3-44323-00 OUTER PLATE,CARTRIDGE 1 item - $8.70 each
6H3-44324-A0 GASK=5ET,CARTRIDGE 1 item - $2.05 each

Thank you for your order and new parts price request !

--------------------------------------------------------------------------

Subject: 1973 Mercury 50hp - switchbox

David;

By the Serial # 3575995 that you provided, your 50hp Mercury was built in
1973. I do have in stock, a new Mercury switchbox, part #333-3213A3 that
retails for $221.05 and your cost is $176.80 plus $5.45 for Priority Mail
with handling. I do not have any good, used ones in stock at this time.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

Subject: 1969 Mercury 50hp - lower unit seal kit

Laird;

Your request was forwarded to me by Bill Kelly - Mastertech.

Mercury does not have available a gearcase seal kit for your 1969 Mercury
50hp. All of the seals, gaskets, o-rings and impeller are available
separately and retail for $91.60. your cost would be $75.30 plus $5.45 for
Priority Mail with handling.

I do have all of these parts in stock at this time. Should you wish to
order, please call toll free, 866-247-1092 Pacific time. MasterCard,
Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1975 Mercury 20hp powerhead

Your request was forwarded to me by Bill Kelly - Mastertech.

Sorry but I do not have a good, used or rebuilt powerhead for your 20hp
Mercury. New powerheads are no longer available from Mercury.

--------------------------------------------------------------------------

Subject: 1979 Mercury 9.8hp - parts

Michael;

Your request was forwarded to me by Bill Kelly - Mastertech.

By the Serial # 5207764 that you provided, your 9.8hp Mercury was built in
1979. Mercury does not offer a complete powerhead rebuild kit for your
9.8hp.

A new Mercury piston retails for $118.95 and your cost is $99.85. New
Mercury piston rings retail for $3.50 each and your cost is $2.75 each. A
Mercury gasket kit retails for $25.00 - your cost $20.00.

The wrist pin needle bearings are no longer available from Mercury and I do
not have anSUy other sources for them. New Mercury rod to crankshaft needle
bearings - takes a total of 58 - are $0.20 each. New top and bottom seals
retail for $5.00 - your cost $4.00 each. The other top seal retails for
$9.90 and your cost is $7.95.

Priority Mail with handling for the above parts would cost $6.65.

I do not have all of the above Mercury parts in stock. My orders from
Mercury take 4 to 5 working days to get here, and are sent to you the same
day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1985 Mercury 25hp - swivel bracket

Jed ;

I do not have a good, used swivel bracket for your 1985 Mercury 25hp. A new
one, part #3415-822237A1 retails for $251.95 and your cost would be $211.65
plus $8.65 for UPS shipping.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1984 Mariner 25hp carb part

Craig;

Your request was forwarded to me by Bill Kelly - Mastertech.

A new low speed jet from Mercury for your 1984 Mariner 25hp is $3.35. A new
main jet would cost $4.20. Postage and handling is $1.75.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1999 Mercury 150hp - service manual

Mario;

I do have in stock, Mercury's service manual for your 150hp. your cost is
$40.00 including postage. This mercury service manual is the same as the one
we use in our service shop and is published by Mercury.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1974 Chrysler 75hp - parts

Dave Irwin ;

By theln Model # 757HA that you provided, your Chrysler outboard is a 75hp
that was built in 1974. New Chrysler carb. gasket kits are $1.60 each. New
Chrysler carb repair kits are $12.40 each. Each kit does one carb - you
would need 3 gasket or 3 repair kits to cover your 75hp.

New gaskets, seals and o-rings for your lower gearcase would cost $23.95. A
new water pump impeller is $10.65. Priority Mail with handling for the above
parts would cost $5.45.

Not all of the above parts are in stock. My orders frnom Mercury take 4 to 5
working days to get here, and are sent to you the same day the order
arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: Re: inquiry

Sorry but I do not have any source for the Yamaha generator dealers or
distributors outside of the USA. We are in the process of closing out our
Yamaha generator dealership and will no longer handle their generators.

--------------------------------------------------------------------------

Subject: inquiry

Dear Sir's
Our company "Toridas" is wholesaller of portable generators in Lithuania.
We are looking for Yamaha EF6600.. and EF 4600 generators.
Can you contact us with Yanaha dealer in Europe.
Best regards hearing from you.

Saulius

--------------------------------------------------------------------------

Subject: 5hp Mariner parts sent Priority Mail

Robert;

Just to let you know that the parts were sent to you by Priority Mail this
afternoon. Your bankcard has been charged for $52.20.

--------------------------------------------------------------------------

Subject: Re: need parts

Sorry but I do not have a source for Osco exhaust manifolds and the only Chrysler parts that are available to me are for their outboards. Do not deal in paints as we cannot ship hazardous materials.

For Chrysler Marine parts, check with : Chrysler Marine Engines and Sterndrive Manuals

Marysville Marine
1551 Michigan Ave.
Marysville, MI 48040
(810) 364-7653

Subjet: need parts

rebuilding a houseboat. searching for (4) osco chrysler manifold for 318 225 hp marine engine and (4) 14 lb elbows.
also copper coat antifouling paint.

Sorry but I do not have a source for Osco exhaust
manifolds and the only Chrysler parts that are available to me are for their
outboards. Do not deal in paints as we cannot ship hazardous materials.

For Chrysler Marine parts, check with : Chrysler
Marine Engines and Sterndrive Manuals

Marysville Marine1551 Michigan
Ave.Marysville, MI 48040(810) 364-7653

--------------------------------------------------------------------------

Subject: Yamaha sterndrive parts

Jim

Your request— was forwarded to me by Bill Kelly - Mastertech. Sorry but I am
not a Yamaha sterndrive dealer and cannot help you with parts for their
sterndrives and engines. Try calling 800-962-7926 (Yamaha customer phone #)
and they may be able to give you the names of dealers in your area.

--------------------------------------------------------------------------

Subject: Re: Yamaha Outboard engine

Sorry but I do not have any used or rebuilt 85hp Yamaha outboards at this
time. Both Mercury and Yamaha have stipulated to their dealers that we can
only sell new outboards in our sales and service territory. Selling outside
of my territory will result in the loss of my dealership with either
company.

--------------------------------------------------------------------------

Subject: Yamaha Outboard engine

Hi,

I need a new/used engine for my boat.

My last one was a Yamaha 85HP Outboard AETL Powerhead, year model 1995/96.
Part number 688-w-00-90-83-40.

I would like the new one to be the same engine as the old one.

Can you help me? If so how much will it cost?

Yours,

Christian

--------------------------------------------------------------------------

Subject: Re: engine

Sorry but I do not have any used or rebuilt outboards in the 80 to 100hp
class. Both Mercury and Yamaha have stipulated to their dealers that we can
only sell new outboards in our sales and service territory. Selling outside
of my territory will result in the loss of my dealership with either
company.

--------------------------------------------------------------------------

Subject: engine

i am looking to buy an outbaord ,about 80-100 hp .mercury or yamaha.new if
cheap or used preferably.please send some details on the engine you have
and
some prices too.thanks,damien caldwell.

--------------------------------------------------------------------------

Subject: 1988 Force 50hp - parts

Bill;

A new Force prop for your 50hp, a 10 3/8' x 11 1/2" aluminum, retails for
$140.00 and your cost is $117.60. a A new clutch is $55.95 and a new lower
unit seal and gasket kit $12.45. UPS shipping for these parts would cost
$8.47.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1988 Mercruiser 3.0L - flywheel

Gordon;

Sorry but I do not have a good used flywheel for your 3.0 L Mercruiser. New
ones, part #220-8775 are no longer available from Mercury.

--------------------------------------------------------------------------

Subject: 1974 Mercury 85hp - internal wiring harness

Mike;

I do not have a good used internal wiring harness for your 85hp. A new
Mercury wiring harness, part #84-66055A1 retails for $153.60 and your cost
is $122.85 plus $5.45 for Priority Mail with handling.

Not in stock at this time, my orders from Mercury take 4 to 5 working days
to get here, and are sent to you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1967 Mercury 3.9hp - carb

Eric;

By the Serial # 2147804 that you provided, your 3.9hp Mercury was built in
1967. New carbs are no longer available from Mercury and I do not have any
used or rebuilt ones in stock at this time.

--------------------------------------------------------------------------

Subject: Sears 15hp - manual & parts list

Robert;

I do not handle Sears outboards, so I do not have access to any parts or
service manuals for these engines.

--------------------------------------------------------------------------

Subject: 1988 Force 125hp - trim & tilt motor

Dion;

Your request was forwarded to me by Bill Kelly - Mastertech.

The original system was built by Prestolite, a company that is no longer in
business. New replacement parts and good, used parts are not available as
most of the original systems let water get into the motors and pump assy.

Mercury does have a re-engineered replacement kit that includes the motor,
pump, valve assy., reservoir and 4 new hydraulic lines. This kit rtails for
$485.10 and you cost is $407.50 plus the cost of shipping on 9 lbQs.

I do carry these kits in stock. Mastercard, Discover and Visa bankcards are
accepted.

--------------------------------------------------------------------------

Subject: 1991 Mariner 40hp - impeller

R. M. ;

A new Mariner impeller, part #47-99971M retails for $43.15 and your cost is
$34.50. A new gasket that is located between the wear plate and pump
housing, retails for $3.20 - your cost $2.75. Priority Mail with handling is
$5.45.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1972 Mercury 50hp - internal wiring harness

Mike;

I do not have at this time, a good, used internal wiring harness for your
50hp. A new one from Mercury, part #52770A1 retails for $64.25 and your cost
is $53.80 plus $5.45 for Priority Mail with handling.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 2001 Mercury 75hp - service manual

Michael;

I do have in stock, Mercury's service manual for your 75hp. Your cost is
$40.00 including postage. This manual contains the wiring diagrams as well
as all the service information needed to work on your 75hp.

Note : Mercury does not provide information regarding Teleflex guages or any
other manufactures guages other than those guages built by Mercury. The
Teleflex guages that you have should have come with instructions regarding
their hook-up to your 75hp. If not then check with Teleflex.

MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1967 Mercury 65hp - lower unit housing

James

Your request was forwarded to me by Bill Kelly - Mastertech.

By the Serial # 2165781 that you provided, your 65hp Mercury was built in
1967. New lower unit housings are no longer available from Mercury. At this
time, I do not have a good, used housing for your 65hp.

--------------------------------------------------------------------------

Subject: 1967 Mercury 50hp - service manual sent

John;

Just to let you know that the Mercury service manual was mailed to you this
afternoon. Your bankcard has been charged for $40.00.

--------------------------------------------------------------------------

Subject: 1984 Force 85hp - thermoswitch

Erik;

Your request was forwarded to me by Bill Kelly - Mastertech.

A new Force thermoswitch that is mounted in the cylinder head, is $45.35
plus $5.00 for Priority Mail with handling.

Not in stock right now, my orders from Mercury take 4 to 5 working days to
get here, and are sent to you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1976 Mercury 7.5hp - parts list

Your request was forwarded to me by Bill Kelly - Mastertertech.

By the Serial #4553474 that you provided, your 7.5hp Mercury was built in
1976. The enclosed attachments are the parts in the Mercury remote control
kit that are used to connect the remote control cables to the 7.5hp. Some of
the individual parts are still available from Mercury and the complete kit
is $50.95 plus $5.00 for Priority Mail with handling. Let me know which
parts you need, by part # and name and I will check their availability.

I do not have a good, used or rebuilt powerhead for your 1985 Mercury 25hp. New ones from Mercury retail for $1395.45 and your cost is $1220.65 plus the cost for UPS shipping to your location of 31 lbs.

My orders from Mercury take 4 to 5 working days to get here, and are sent to you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time. MasterCard, Discover and Visa bankcards are accepted.

Subject: powerhead

i need a powerhead for a 1985 25hp xd mercury new or used! thank
you for your time

I do not have a good, used or rebuilt powerhead for
your 1985 Mercury 25hp. New ones from Mercury retail for $1395.45 and your cost
is $1220.65 plus the cost for UPS shipping to your location of 31 lbs.

My orders from Mercury take 4 to 5 working days to
get here, and are sent to you the same day, the order arrives.
Should you wish to order, please call toll free, 866-247-1092
Pacific time. MasterCard, Discover and Visa bankcards are
accepted.

--------------------------------------------------------------------------

Subject: powerhead

--------------------------------------------------------------------------

Subject: 1991 Mercury 115hp - tilt/trim motor
Date: Tue, 6 Mar 2001 09:08:35 -0800

Chad;

The new Mercury replacement motor for your tirm/tilt system comes with
instructions and your cost is $361.80 plus $9.18 for UPS shipping. Not in
stock right now, my orders from Mercury take 4 to 5 working days to get
here, and are sent to you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 50hp Mercury 4 stroke - service manual

Craig;

If your 50hp Mercury is a 4 stroke, then it was built between 1995 and the
present. I do have in stock, Mercury's service manual for your outboard.
This is the same Mercury service manual as the one we use in our service
shop and it is published by Mercury. Your cost would be $40.00 plus $24.00
for U.S.Postal Service Airmail to Rotterham in England.

Visa, Discover and MasterCard bankcards arte accepted for payment in US
funds. You can place your order for the Mercury service manual by¡ going to :
where you can provide your bankcard
information for payment.

You will recieve an Email from me confirming that I have recieved your order
and the service manual has been sent by airmail to you.

--------------------------------------------------------------------------

Subject: 1985 Mercury 90hp - service manual

Rob;

I do have in stock, Mercury's service manual for your 1985 Mercury 90hp.
This is the same Mercury service manual as the one we use in our service
shop and it is published by Mercury. Your cost is $40.00 including postage.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: Re: FIND A REPLACEMENT PART FOR MY MARINER MOTOR

I will need the Serial # from your 75hp Mariner in order to determine the correct trim motor.

Subject: FIND A REPLACEMENT PART FOR MY MARINER MOTOR

I HAVE MARINER OUTBOARD 75HP . I NEED TO FIND POWER TRIM MOTOR NEW OR REMANOFACTURE ,OR THE BEST PRICE YOU CAN OFFER TO ME.
JUST THE PRICE THE FASTER YOU CAN THANK YOU

I will need the Serial # from your 75hp Mariner in
order to determine the correct trim motor.

--------------------------------------------------------------------------

Subject: FIND A REPLACEMENT PART FOR MY MARINER MOTOR

I HAVE MARINER OUTBOARD 75HP . I NEED TO FIND
POWER TRIM MOTOR NEW OR REMANOFACTURE ,OR THE BEST PRICE YOU CAN OFFER TO
ME. JUST THE PRICE THE FASTER YOU CAN
THANK YOU

--------------------------------------------------------------------------

Subject: Re: Need parts

Paul;

Look on the clamp brackets or on the swivel bracket. I will also need to
know the horsepower of your outboard.

--------------------------------------------------------------------------

Subject: Need parts

I'm looking for a fly wheel for a 1985 chrysler motor, Do you know where I
can find one at. I don't have the serial number and model number, but I
can get it, just needing to know where to look. thanks, Paul

--------------------------------------------------------------------------

Subject: 1985 Mariner 40hp - starter

Gilbert;

At this time, I do not have a good used or rebuilt starter for your 40hp
Mariner. A new Mariner starter motor, part #50-814980M retails for $333.05
and your cost would be $249.80 plus the cost of shipping of 6 lbs. to your
location.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1979 Mercruiser 898 - owner's manual

Kevin;

The Mercruiser owner's manual is available from Mercury for your 1979 MCM
198hp. Not in stock at this time, My orders from Mercury's Publication
Division, take 6 to 7 working days to get here and are sent to you the same
day they arrive.

Should you want to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1993 Mercury 75hp - parts

Ozren;

Sorry but I ,do not have any used pistons or rods for your 75hp Mercury. The
numbers on your rod and piston are casting #'s and not part #'s. Your
piston's casting # 777-9009-7 would indicate that it may possibly be a
0.030" oversize piston - it's part # is 777-9009A7 which retails for
$179.65 - your cost $140.15.

A new Mercury standard size piston, part #777-9009T13 retails for $179.65
and your cost is $140.15. A new Mercury rod, part #638-9002A6 retails for
$202.30 and your cost is $157.65.

A Mercury powerhead gasket set, part #27-43004A99 retails for $68.55 and
your cost is $54.85. New Mercury rod bearings, part #31-43012A1 retail for
$61.15 each and your cost is $48.90 each.

U.S.Postal Service Airmail for 1 piston, 1 rod, 1 gasket set and 3 rod
bearings would be $28.37. Visa, MasterCard and Discover bankcards are
accepted for payment in US funds.

You can place your order for the parts by going to :
where you can provide your bankcard
information for payment.

You will recieve an Email from me confirming that I have recieved your
order. Your bankcard is not charged untill the new parts have arrived here
and are ready to be sent to you.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

--------------------------------------------------------------------------

Subject: Re: Question

Dennis;

From the information provided, it is a 40hp electric start, long shaft, oil
injected with remote controls - built in 1991. I do not know of any web site
that has information for the Yamaha outboards. It's value is based on it's
condition and what other similar outboards are selling for in your area.

--------------------------------------------------------------------------

Subject: Question

What can you tell me about this model Yamaha motor?

The only info I have is :

Yamaha 40
Model 403LRP - Precision Blend - Electric Start....

Do you know if there is a web site wherHe I could get more information on
this motor, and it's value?

--------------------------------------------------------------------------

Subject: Re: 25hp outboard 15" electric

Matt;

Both Mercury and Yamaha have stipulated to their dealers that we can only sell new outboards in our sales and service territory. Selling outside of my territory will result in the loss of my dealership with either company.

--------------------------------------------------------------------------

Subject: 25hp outboard 15" electric

Do you folks ship outboards? Could you tell me how much for a 25 hp short shaft, tiller, electric start? Either yamaha or mercury. Would have to ship to 50501 zip. Thanks.

Matt

Matt ;

Both Mercury and Yamaha have stipulated to their
dealers that we can only sell new outboards in our sales and service territory.
Selling outside of my territory will result in the loss of my dealership with
either company.

--------------------------------------------------------------------------

Subject: 25hp outboard 15" electric

Do you folks ship
outboards? Could you tell me how much for a 25 hp short shaft, tiller,
electric start? Either yamaha or mercury. Would have to ship to 50501 zip.
Thanks.

--------------------------------------------------------------------------

Subject: 1986 Mariner 90hp - service manual & parts list mailed

Ted Currin ;

Just to let you know that the Mariner service manual & parts list were
mailed to you this afternoon. Your bankcard has been charged for $57.00.

--------------------------------------------------------------------------

Subject: 1987 Yamaha 70hp - parts

Clive;

Sorry but I do not have any used trim/tilt motors or clamp brackets for your
70hp Yamaha. A new Yamaha trim/tilt motor retails for $422.23 and your cost
would be $367.90. A new Yamaha port side clamp bracket retails for $218.30 -
your cost $191.10. A new Yamaha stbd side clamp bracket retails for
$200.76 - your cost $175.50.

Aftermarket motors and brackets for your Yamaha are not available that I
know of.

--------------------------------------------------------------------------

Subject: 1994 Mercury 60hp gaskets

Jim;

New Mercury gaskets for the air cleaner are $0.75 each plus $1.25 for
postage and handling.

Not in stock right now, my orders from Mercury take 4 to 5 working days to
get here, and are sent to you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1994 Force 40hp - parts

Tom;

I do not have any of the parts in good, used condition and at this time do
not have any trusted sources for them in used condition. A new flywheel from
Mercury, retails for $166.60 and his cost is $139.95.

A new Force stator retails for $297.55 and his cost is $249.90. A new Force
trigger assy. retails for $40.40 and his cost is $32.35. UPS shipping would
cost $15.96.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish tfo order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1987 Force 85hp - parts

Keith;

Your request was forwarded to me by Bill Kelly - Mastertech.

The motor mount, part # F85965 is no longer available from Mercury and I do
not have any in stock. The bolts are $0.50 each and I cannot ship the paint
you requested as I am not licensed to ship hazardous materials.

--------------------------------------------------------------------------

Subject: 1988 Mercury 100hp - trim/tilt motor

Joseph

If your 100hp Mercury has 3 hydraulic cylinders, then it is a design I
system. The company that made the motor is no longer in business and the
motor is not available. Mercury does have a re-engineered power trim kit the
replaces all the parts mounted on your outboard. This complete kit retails
for $919.05 and your cost is $689.30 plus the cost to ship 32 lbs.

If your 100hp has a single hydraulic cylinder, then a new replacement motor
from Mercury retails for $433.50 and your cost is $364.45 plus the cost to
ship 7lbs.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1990 Force 120hp L-Drive - exhaust manifold

Mitch;

Sorry but we have had to replace quite a few exhaust manifolds on the Force
L-Drives, but thus far have not found a good, source for used ones. The
first 120hp Force L-Drives were built in 1990.

A new Force exhaust manifold for your 120hp retails for $531.75 and your
cost is $398.75 plus the cost of shipping 26 lbs. to your location.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, please Vcall toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1986 Mercury 3 cyl. 50hp - service manual

Phil;

By the Serial # 9421181 that you provided, your 3 cylinder 50hp Mercury was
built in Belgium in 1986. I do have in stock, Mercury's service manual for
your 50hp. This Mercury service manual is the same as the one we use in our
service shop and it is published by Mercury. Your cost would be $40.00 plus
$19.20 for U.S.Postal Service Airmail to Edinburgh, Scotland.

MasterCard, Discover and Visa bankcards are accepted for payment in US
funds. You can place your order for the Mercury service m'anual by going to :
where you can provide your bankcard
information for payment. Your Customer ID Number is : GP50MER181.

You will recieve an Email from me confirming that I have recieved your
order. Your bankcard is not charged untill the new Mercury service manual is
sent to you by Airmail.

--------------------------------------------------------------------------

Subject: 2000 MCM 7.4L MPI - service manual

Randall;

I do have in stock the Mercruiser engine service manual for your 7.4L MPI
engine. Your cost is $40.00 including postage. This is the same Mercruiser
service manual as the one we use in our service shop and is published by
Mercury.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1985 Mercury 7.5hp - water pump

Bill;

Your 24request was forwarded to me by Bill Kelly - Mastertech.

By the Serial # OA105561 that you provided, your 7.5 hp Mercury was built in
1985. A new Mercury water pump impeller is $11.30. A new Mercury top pump
housing is $13.15 and a new Mercury bottom pump housing is $25.15.

I do have all of these parts in stock and Priority Mail with handling would
cost $5.00.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1976 Mercury 7.5hp - parts

Jerry;

Your request was forwarded to me by Bill Kelly - Mastertech.

By the Serial # 4309313 that you provided, your 7.5hp Mercury was built in
1976. A new Mercury cylinder block cover gasket is $2.25. All of the lower
unit shims, bearings, seals, o-rings, impeller and guide tube, new from
Mercury retail for $198.50 and your cost is $158.80.

A new Mercury pinion gear retails for $53.15 - your cost $44.65. A new
Mercury forward gear retails for $133.70 - your cost $112.30. A new Mercury
clutch retails for $90.L:\<90 - your cost $76.35. A new Mercury reverse gear
retails for $117.20 - your cost $98.45. Priority Mail with handling would
cost $9.05 for all of the above parts.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1990 Force 120hp - complete gearbox

Costi;

A new complete Force gearbox - gear housing with all internal parts, retails
for $2042.95 and your cost is $1532.50 plus the cost of shipping 49 lbs.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, MasterCard, Discover and Visa bankcards are
accepted.

--------------------------------------------------------------------------

Subject: 1986 Mariner 40hp - start solenoid

Jeremy;

A new Mariner starter solenoid, part # 89-95642M retails for $62.85 and your
cost is $50.25 plus $5.00 for Priority Mail with handling.

Not in stock right now, my orders from Mercury take 4 to 5 working days to
get here, and are sent to you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: Fw: Parts Request Form

Bill ;

I do have one new Yamaha oil tank conversion kit in stock. It includes the
oil fill at tank converter and the oil fill deck plate - similar to a gas
fill but marked as oil. your cost is $22.30.

--------------------------------------------------------------------------

Subject: Fw: 1986 Mariner 90hp - service manual & parts list mailed

Ted;

The following message was sent to you on Tuesday, March 6th.

Subject: 1986 Mariner 90hp - service manual & parts list mailed

Ted;

Just to let you know that the Mariner service manual & parts list were
mailed to you this afternoon. Your bankcard has been charged for $57.00.

--------------------------------------------------------------------------

Subject: 1985 Mercury 90hp - service manual mailed

Rob;

Just to let you know that the Mercury service manual was mailed to you
yesterday afternoon. Your bankcard has been charged for $40.00.

--------------------------------------------------------------------------

Subject: 1992 Yamaha 90hp - parts

Jackie;

A new Yamaha forward gear retails for $113.19 and your cost is $88.80. A new
Yamaha clutch retails for $86.30 and your cost is $69.90. A new reverse gear
retails for $75.64 and your cost is $61.25. Priority Mailq with handling
would cost $5.45.

--------------------------------------------------------------------------

Subject: 1989 Force 50hp - parts

Donald;

Your request was forwarded to me by Bill Kelly - Mastertech.

A new Force water pump kit retails for $55.60 and your cost is $44.45. A new
Force impeller retails for $11.45 and your cost is $9.15. A force service
manual is $40.00 including postage and a force parts list for your 50hp is
$17.00 including postage. A new Force head gasket retails for $24.45 - your
cost $19.40.

All of the above are in stock except for the head gasket. My orders from
Mercury take 4 to 5 working days to get here, and are sent to you the same
day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1998 Mercury 200EFI-CXI - lower unit

Alfredo;

Mercury had a price revision the first of this year and a new complete lower
unit, part #1647-9148T86 now retails for $3872.95 and your cost is $2904.95.
U.S.Postal Service Priority Mail would cost $90.80.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1979 Chrysler 50hp Ignition coil

Juan;

Sorry but new ignition coils are no longer available from Mercury and I do
not have any good, used ones at this time.

Check with Fairwinds Marina they may be able to help you.

Fairwinds Marina Inc.
1000 Fairwinds Drive
Annapolis, MD, 21401(410) 974 - 0758

--------------------------------------------------------------------------

Subject: 1984 ? Mercury 175hp - lower unit

Dennis;

The Mercury 175hp was built from 1976 thru 1981 and again from 1985 thru the
present. A new Mercury complete long shaft lower unit for a 1985 model,
retails for $3429.50 and your cost is $2572.50 plus $44.13 for UPS shipping.
I do not have any good, used or rebuilt ones in stock at this time.

I would need the Serial # from your 175hp in order to determine the year it
was built. My orders from Mercury take 4 to 5 working days to get here, and
are sent to you the same day the order arrives.

Should youm wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1968 Mercury 20hp - parts

Patrick;

I do not have a good, used long drive shaft for your 20hp and as you know,
new ones are no longer available from Mercury. Here are the part #'s for the
long shaft drive shaft, starting with the original # issued by Mercury and
ending in the last known #.

45-39375
45-53638A1
45-56793A1
45-64430A1
45-74852A1
45-75035A1
45-93301A1

I do have in stock a new Mercury propshaft that retails for $206.20 and your
cost is $173.19 plus $5.45 for Priority Mail with handling. Mercury does not
have a lower ’unit seal and gasket kit , but all of the seals, orings,
gaskets are available. Would need to know which water pump parts you need in
order to qoute a kit.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1966 Mercury 110hp - service manual

Glenn ;

I do have in stock, Mercury's service manual for your 1966 Mercury 110hp.
Your cost is $40.00 including postage. This is the same Mercury service
manual as the one we use in our service shop and it is published by Mercury.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1988 Mercury 25hp - service manual

Will;

I do have in stock, Mercury's service manual for your 1988 Mercury 25hp.
Your cost is $40.00 including postage. This Mercury service manual is the
same as the one that we use in our service shop and it is published by
Mercury.
Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: Re: 61 merc 700

Sorry but I do not have any tachometers for your 70hp and new ones that
would work on your outboard are no longer available from Mercury.

--------------------------------------------------------------------------

Subject: 61 merc 700

i'm inquiring about a tach for a 61 merc 700, any info would be greatly
appreciated. i purchased a manual for it from you last summer but there
isn't any info on that particular subject.
thanks

--------------------------------------------------------------------------

Subject: 1979 Mercury 7.5hp - parts

Richard;

Mercury's seal kit for your lower unit is $40.30. The Mercury service manual
for your 7.5hp is $40.00 including postage. The Mercury parts list is $17.00
including postage.

A new Mercury starter rops is $3.25 and a new aluminum guide $13.95. A new
plastic guide is $5.50. Priority Mail with handling for the parts is $5.45.

I do have all of the above items in stock. Should you wish to order, please
call toll free, 866-247-1092 Pacific time. MasterCard, Discover and Visa
bankcards are accepted. O"r you can use a personal check if you wish.

--------------------------------------------------------------------------

Subject: 1984 Force 125hp - powerhead gasket set

Josh;

A new Force powerhead gasket set from Mercury retails for $102.35 and your
cost is $81.90. Priority Mail with handling would cost $5.45.

Not in stock right now, my orders from Mercury take 4 to 5 working days to
get here, and are sent to you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1992 Mercruiser 7.4Litre/Bravo - Manuals

Vincent;

Mercruiser does not have one service manual or parts list that covers both
engine and stern drive. The service manual for your engine is $40.00 and the
engine parts list is $17.00.

The Bravo stern drive service manual is $40.00 and it's parts list $17.00.
All prices include postage. I do have all of these in stock at this time.

Should you want to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1995 Mariner 50hp - manuals

Russ;

I do have in stock the Mariner service manual for your 50hp Mariner. Your
cost is $40.00 including postage. The Mariner owner's manual for $17.00
including postage is not in stock and my orders from Mercury's Publication
Division, take 6 to 7 working days to get here and are sent to you the same
day they arrive.

I also have in stock the Mariner parts list for your 50hp. Your cost is
$17.00 including postage.

Should you want to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, DiscovLer and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: Re: older generator

X-MimeOLE: Produced By Microsoft MilmeOLE V5.50.4522.1200

Sorry but Yamaha does not publish or provide any compression readings for
their products in the service manuals or other literature. I know of no
other web sites with this type information.

--------------------------------------------------------------------------

Subject: older generator

I was wondering if you could help me. I have an older yamaha
generator,EF2800, approx. 10 years old.I was hoping to find out what the
compression reading should
be to determine if engine is on its way out.If you know of any other web
sites that
pertain to mechanical information, it would be greatly
appreciated.Thanks in
advance.

–

--------------------------------------------------------------------------

Subject: Re: Yamaha

Both Mercury and Yamaha have stipulated to their dealers that we can only sell new outboards in our sales and service territory. Selling outside of my territory will result in the loss of my dealership with either company.

--------------------------------------------------------------------------

Subject: Yamaha.

I am interested in the smallest 2 stroke Yamaha outboard you have for a sailboat dinghy motor. Can you give me a dealer price? I will give you credit in my next book. First book, The Hawaiian Voyages of the Ono Jimmy will be on every Trans Pac boat this summer. See this book at http://www.amazon.com and http://www.hawaiisailing.com
thanks, steve dixon

Both Mercury and Yamaha have stipulated to their
dealers that we can only sell new outboards in our sales and service territory.
Selling outside of my territory will result in the loss of my dealership with
either company.

--------------------------------------------------------------------------

Subject: Yamaha.

I am interested in the smallest 2 stroke Yamaha
outboard you have for a sailboat dinghy motor. Can you give me a dealer price?
I will give you credit in my next book. First book, The Hawaiian Voyages of
the Ono Jimmy will be on every Trans Pac boat this summer. See this book at http://www.amazon.com" http://www.amazon.com and http://www.hawaiisailing.com" http://www.hawaiisailing.com
thanks, steve

--------------------------------------------------------------------------

Subject: 1997 Mercruiser 3.0L 130hp - parts

Aaron;

A new Mercruiser timing chain cover, part #59341A1 retails for $83.25 and
your cost is $72.45. A new oil seal retails for $12.05 - your cost $9.95. A
new gasket retails for $1.70 - your cost $1.50. Priority Mail with handling
would cost $6.65.

Not all of the above parts are in stock right now. My orders from Mercury
take 4 to 5 working days to get here, and are sent to you the same day the
order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1988 Mercury 100hp - parts

Brian;

There were 2 different connecting rods/pistons used in the production of
your 1988 Mercury 100hp. I will need the casting/forging # from your
connecting rods in order to determine the correct parts. The #'s will either
be : 638-8532--1 or 646-818846.

--------------------------------------------------------------------------

Subject: 1974 Chrysler 10hp - service manual

Bob;

The Chrysler service manual is still available for your 1974 Chrysler 10hp -
your cost is $40.00 including postage. Not in stock at this time, my orders
from Mercury's Publication Division, take 6 to 7 working days to get here
and are sent to you the same day they arrive.

Should you want to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1992 MCM service manuals & parts lists sent 2nd day UPS

Vincent;

Just to let you know that the 2 MCM service manuals and 2 parts lists were
sent to you yesterday afternoon by UPS 2nd day air. The manuals and parts
lists were $114.00 and the extra charge for 2nd day air was $10.00. Your
bankcard has been charged for a total of $124.00.

The UPS tracking # is : 1Z 367 6XW 02 4434 9598

--------------------------------------------------------------------------

Subject: Chrysler parts sent Priority Mail

Dave;

Just to let you know that 1 carb repair kit and all the other parts were
sent to you yesterday afternoon by Priority Mail. The 2 missing carb kits
will be sent to you as soon as they arrive here at no additional charge for
postage. The parts sent were $47.00 and Priuority Mail with handling was
$5.45. Your bankcard has been charged for $52.45.

--------------------------------------------------------------------------

Subject: Mercury starter drive sent Priority Mail

Steve;

Just to let you know that the new Mercury starter drive gear was sent to you
by Priority Mail, yesterday afternoon. The part was $29.80 and Priority Mail
with handling $5.00. Your bankcard has been charged for $34.80.

--------------------------------------------------------------------------

Subject: Force clutch & lower unit seal kit sent Priority Mail
Bill ;

Just to let you know that the new clutch and lower unit seal kit were sent
to you yesterday afternoon by Priority Mail. The parts were $68.40 and
Priority Mail with handling $5.45. Your bankcard has been charged for
$73.85.

--------------------------------------------------------------------------

Subject: Chrysler 120hp oil seal sent Priority Mail

Scott;

Just to let you know that the new Chrysler oil seal was sent to you
yesterday afternoon by Priority Mail. The seal was $13.90 and Priority Mail
with handling $5.00. Your bankcard has been charged for $18.90.

--------------------------------------------------------------------------

Subject: Force bearing cage & roller set sent Priority Mail

Eric;

Just to let you know that the Force bearing cage and roller set was sent to
you yesterday afternoon by Priority Mail. The part was $74.45 and Priority
Mail with handling $5.00. Your bankcard has been charged for $79.45.

--------------------------------------------------------------------------

Subject: 1971 MCM 165hp valve cover gasket

Brad;

I do have in stock, Mercruisers valve cover gasket for your 1971 Mercruiser
165hp. Your cost is $5.80 plus $5.00 for Priority Mail with handling.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1983 Chrysler 130hp

Jeff;

The 130hp Chrysler was only built in 1972 and 1973. The original power
tilt/trim motor and pump system was built by Prestolite, a company that is
no longer in business and replacement parts (motor etc.) are not available.

Mercury does have a re-engineered replacement system that consists of the
motor, pump, reservoir and valve assy. that connects to your 4 hydraulic
lines and electrical. This new unit retails for $485.10 and your cost is
$407.50 plus $12.08 for UPS shipping.

I do have this replacement from Mercury in stock at this time. Should you
wish to order, please call toll free, 866-247-1092 Pacific time. MasterCard,
Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1988 Force 125hp - parts

Gary;

The seal that is mounted in the cover of the power trim cylinder, is not
available separatly from the cover. A new cover from Force/Mercury retails
for $120.15 and your cost is $100.85.

New top and bottom o-rings are $1.20 each. the other 2 orings are $1.20 and
$0.40 each. Priority Mail with handling would cost $5.00.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
-MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: 1983 Mercury 200hp - parts

Louis;

New Mercury vent bowl jets, 0.096" are $3.35 each. New Mercury carb rebuild
kits for carbs marked : WH17R, WH30R or WH34R are $53.40 each. All other
carbs use carb rebuild kits that are $62.85 each.

My orders from Mercury take 4 to 5 working days to get here, and are sent to
you the same day the order arrives.

Should you wish to order, please call toll free, 866-247-1092 Pacific time.
MasterCard, Discover and Visa bankcards are accepted.

--------------------------------------------------------------------------

Subject: Re: Mercury parts

Patrick ;

Our fax is not in operation as we are on line most of the time working on our new web pages. You can send the quote as an attachment to an email. I do have in stock the 15-20788A1 shim set for $8.40 and the 15-33431A1 shim set for $8.85. Both are nol' longer available from Mercury.

Subject: Mercury parts

Hi, getting back to you on your response to my question about par')ts for my 68 merc mod.200.
Please send me your fax # when you have time.
I talked to the people that have the motor for repairs today. there quote on parts need is quite a bit more than I expected. This is if they can get all the parts. Their parts list is long and I would like to fax it to you for your input. besides the prop shaft and drive shaft, there are 2 other parts they say are unavailable.
Part #s
1520788a1 shim set
1533431a1 shim set
I will fax their list o )+you, it is quite long. Would like your input
Thank You
Pat

Patrick ;

Our fax is not in operation as we are on line most
of the time working on our new web pages. You can send the quote as an
attachment to an email. I do have in stock the 15-20788A1 shim set for $8.40 and
the 15-33431A1 shim set for $8.85. Both are no longer available from
Mercury.
--------------------------------------------------------------------------

Subject: Mercury parts

Hi, getting back to you on your response to my question35
about parts for my 68 merc mod.200.
Please send me your fax # when you have time.
I talked to the people that have the motor for repairs
today. there quote on parts need is quite a bit more than I expected. This is
if they can get all the parts. Their parts list is long and I would like
to fax it to you for your input. besides the prop shaft and drive shaft, there
are 2 other parts th57ey say are unavailable.
Part #s
1520788a1 shim set
1533431a1 shim set
I will fax their list o you, it is quite long. Would like
your input
Thank You
Pat Goodine

--------------------------------------------------------------------------

Subject: Re: Old Outboard Motor

--------------------------------------------------------------------------

Subject: Old Outboard Motor

Your old outboard motor is a 1.5 hp Viking motor. I have one like it
still in operating condition, however I need a new rubber pump piece.
Regards,
Neil Kinnunen

--------------------------------------------------------------------------

Subject: chrysler 318 intake manifold

Pat;

Sorry but I only have available, parts for Ch


NOW! A NEW, EASIER SHOPPING CART!
outboard manuals & marine engine service & repair manuals includes service manuals, repair manuals, parts lists & owners manuals	Mercury parts search: If you know your part number, put it in and hit the button. includes all available Mercury, Mariner, MerCruiser, SportJet, Sears, Force, Chrysler, Mark, US Marine, QuickSilver, racing outboards & sterndrives parts	NEW PAGES & THE LINKS WORK! WOW! Yamaha parts & parts locator Yamaha manuals ALL IN STOCK + free viewable online owners manuals
	A Work In Progress

outboard motor repair - outboard motor repair manuals, outboard motor parts, outboard motor repair information for Yamaha, Mercury, Mariner, Mercruiser, Sears, Force, US Marine, Mark, outboard motors, inboard/outboards, sterndrives jetdrives, trolling motors, inflatables plus Mercury & Yamaha boats.

MarinePartsMan.com
your source for all your outboard motor repair needs
Call us Toll Free at 1-866-247-1092

new & used marine engine parts, NLA and close-out specials on outboard, I/O, jetdrive, sterndrive and trolling motor parts and repair manuals

MarinePartsMan.com your source for all your outboard motor repair needsCall us Toll Free at 1-866-247-1092 new & used marine engine parts, NLA and close-out specials on outboard, I/O, jetdrive, sterndrive and trolling motor parts and repair manuals

MarinePartsMan.com
your source for all your outboard motor repair needs
Call us Toll Free at 1-866-247-1092

new & used marine engine parts, NLA and close-out specials on outboard, I/O, jetdrive, sterndrive and trolling motor parts and repair manuals